Pipe bending
Among the technical advantages that are worth paying attention to are the following:
- We make perfect bends - we preserve the geometry of the product, the degree of angles - from 0 to 190.
- We process superformats: the maximum diameter is 57 mm, the maximum length is 3800 mm.
- We offer good prices for our services.
The tariff for bending profile and round pipes - UAH 30/bending without VAT
The cost of the order for up to 100 repeating pipes includes a fee for adjusting the matrices - UAH 1,000 without VAT
| Matrices are available | |
| Profile pipe | |
| Dimensions | Wall thickness, mm |
| 15х15 | 1,5-1,8 |
| 20х20 | 1,5-1,8 |
| Round pipe | |
| Diameter, mm | Wall thickness, mm |
| ф8 | 1 |
| ф16 | 1,2 |
| ф20 | 1,2-1,5 |
| ф25 | 1,5 |
| ф27 | 1,5 |
| ф32 | 1,5-2 |
| ф38 | 1,5 |
| ф42 | 2 |
| ф51 | 1,5-2 |
| ф57 | 2-2,8 |
| Coefficients depending on the number of bends on the pipe and the number of repeated pipes: | ||||||
| Bending on the trumpet: | 1 | from 5 | from 10 | |||
| 1 | 0,7 | 0,4 | ||||
| Additional coefficient depending on the volume of the order: | ||||||
| The number of repeated pipes, pcs. | 1 | from 10 | from 50 | from 100 | from 1000 | |
| 2 | 1 | 0,9 | 0,8 | 0,7 | ||
| Ф mm | R mm | A mm | B mm | C mm |
| 8 | any | 60 | н/м | 255 |
| 16 | 50 | 40 | 70 | 95 |
| 110 | 40 | 110 | 155 | |
| 200 | 40 | 210 | 150 | |
| 20 | 50 | 40 | 80 | 95 |
| 25 | 60 | 50 | 80 | 100 |
| 27 | 65 | 50 | 85 | 110 |
| 32 | 80 | 70 | 105 | 120 |
| 38 | 100 | 70 | 135 | 140 |
| 42 | 100 | 70 | 140 | 140 |
| 51 | 125 | 100 | 155 | 160 |
| 57 | 140 | 130 | 175 | 160 |
| 15x15 | 98 | 40 | 75 | 140 |
| 20x20 | 110 | 40 | 75 | 155 |
| 25x25 | 108 | 50 | 80 | 155 |
R - pipe bending radius along the axis
A - distance from the beginning of the workpiece to the beginning of the bend
B - distance between z bends in any plane
C - distance from the end of the bend to the end of the workpiece
The maximum length of the workpiece from the 1st bend to the end of the workpiece is 2890 mm
Max bending angle 180
Contact us if you have any questions
Write us!
Contact us if you have any questions
Write us!